The Hot
Upstairs
Upstairs
Your AC runs all day but the rooms stay warm. Thin attic insulation lets the heat pour in. We fill it deep so your house holds its cool.
SOUTH FLORIDA
BLOWN-IN INSULATION
The fast, low-cost way to cool your home. We fill your attic evenly and lower your AC bills.
- Most Affordable Option
- Fills Your Whole Attic
- Free Quote, Up Front Pricing
Cooling your home should be easy
Tell us about your attic and we will get to work.
Blown In, DONE RIGHT
Cooling South Florida Attics the Right Way
The Thin
Old Layer
Old Layer
Old insulation flattens and leaves bare spots. We add a fresh layer and cover the whole attic floor, edge to edge.
The Messy
Crew
Crew
Some crews leave a dusty mess behind. We mask off your home, fill it clean, and clean up when we are done.
BUILT FOR FLORIDA HEAT
We Fill It Deep and Keep You Cool
Free Quote
Honest Pricing
Home & Commercial
Attic Floors
We blow insulation across your whole attic floor. It blocks the heat before it reaches your rooms.
Top Up Old Insulation
Thin or flat insulation? We add a fresh layer on top to fill it back up.
Existing Walls
We add insulation to finished walls through small holes. No need to tear them open
Hard-to-Reach Spots
Blown-in flows into tight corners and odd shapes that batts cannot fill.
Licensed & Insured
Free Estimate Available
Why South Florida Picks us for Insulation
Removal and Blow In
Most Affordable
Blown-in is our lowest-cost way to cool your home. Big comfort for less money.
Fast Install
Most attics are done in a few hours. Little mess, no long project.
Fills Every Gap
Blown-in flows into corners and around wires. It covers spots batts miss.
Licensed & Insured
Fully insured & licensed blow in insulation contractor. Your home and our crew are covered!
Up-Front Pricing
You see the price before we start. No surprise charges, ever.
Local Crew
We serve Miami-Dade, Broward, and Palm Beach. We are the local blow in insulation pros.
You found the best option for blow in insulation installation company Near You!
Tell us about your attic and we will give it to you straight. If a top-off is all you need, that is what we do. No pushy sales. No surprise fees.
Talk to an Insulation SpecialistAttic Blown In Insulation for Homes & Businesses in Miami
Searching for blown in insulation near me in South Florida? Blown in insulation is loose-fill cellulose or blown-in fiberglass insulation installed with a blower machine, fed through a hose run into the attic. As a licensed blow in insulation contractor, Atlas Insulation is the fastest, most cost-effective blow in insulation installation company for bringing an existing Miami attic up to current R-value standards - the best blow in insulation choice when the goal is a quick, quiet upgrade with no drywall demolition. In South Florida's hot, humid climate, the difference between an under-insulated attic and one built up to R-38 or R-49 shows up directly on your monthly cooling bill.
Atlas Insulation installs both treated cellulose (recycled paper fiber treated with borate for fire and pest resistance, denser and slightly better at slowing air movement) and blown-in fiberglass insulation (lighter, will not absorb moisture, and resists settling). For most South Florida attics we recommend topping up the existing home blow in insulation rather than removing it - assuming the old layer is dry, clean, and free of rodent damage. When it isn't, our insulation removal and blow in crews handle removal and reinstallation in a single visit.
Looking for a blow in insulation company near me? Atlas Insulation is your team of local blow in insulation pros - affordable blow in insulation for residential and commercial properties throughout Miami-Dade, Broward, and Palm Beach County. Call (305) 858-3155 for a free estimate on the cost of blow in insulation services.
Where Attic Blown In Insulation Works Best:
- Attic blown in insulation - Add inches over existing insulation to reach R-30, R-38, or R-49 across the attic floor for noticeably lower cooling bills.
- Older Miami homes - Bring 1970s/1980s attic R-values up to current Florida code with a fast top-up of blown in attic insulation.
- Around obstacles - Flows around recessed lights, top plates, wiring, and HVAC ducts - the gaps batt insulation can't reach.
- Cathedral ceilings - Dense-pack between rafters in finished ceiling cavities with no drywall demolition required.
- Wall blow in insulation - Drill-and-fill dense-pack in existing walls without gutting drywall. Quiet, fast, and clean.
- Commercial drop ceilings - Quiet, fast attic-cavity coverage in offices and retail, installed by your local blow in insulation pros.
If your energy bills keep climbing, your rooms run hot and cold, or your attic still has the original insulation from when the house was built - get your free estimate today. Call (305) 858-3155 for affordable blow in insulation across Miami, Doral, and South Florida.
Frequently Asked
Blow in insulation answers, in plain English.
Blown-in insulation is loose-fill insulation - typically cellulose or fiberglass - installed by blowing it into attic spaces, wall cavities, or other enclosed areas with a hose and blower machine. It fills around wires, pipes, framing, and irregular spaces that batt insulation cannot fully cover.
Both perform well in South Florida. Cellulose is denser, has slightly better air-sealing characteristics, and is treated with borate for fire and pest resistance. Fiberglass is lighter, will not absorb moisture, and tends to settle less. Atlas Insulation will recommend the best option based on your existing insulation, attic ventilation, and budget.
Florida's 2023 building code calls for a minimum of R-30 in unconditioned attics in Climate Zone 1, and many homeowners choose R-38 or R-49 for additional energy savings. That generally translates to 10 to 18 inches of blown-in cellulose or fiberglass, depending on the product's rated R-value per inch.
Yes - in most cases blown-in can be added on top of existing fiberglass batts or older blown-in to bring the attic up to current R-value standards, as long as the existing insulation is dry and uncontaminated. If there is mold, rodent damage, or moisture issues, we will recommend removal first.
As a licensed blow in insulation contractor, Atlas Insulation installs affordable blow in insulation starting at 99¢ per square foot. The final cost of blow in insulation services depends on attic size, target R-value, whether insulation removal and blow in is needed, and accessibility. Call (305) 858-3155 for a free on-site estimate from your local blow in insulation pros.
Trusted by South Florida Homeowners
What Our Clients Are Saying
★ ★ ★ ★ ★
Great Company to deal with. Everything went extremely well from my initial call until the job was done. Bruno was a pleasure to deal with and the two gentlemen that came to my home were outstanding. I would give them 10 stars if I could. Thank you for your professionalism.
★ ★ ★ ★ ★
I recently engaged Atlas Insulation to complete an insulation project for my home, and the quality of their work was exceptional. The team demonstrated professionalism, technical expertise, and a strong commitment to customer satisfaction.
★ ★ ★ ★ ★
Look no further, Atlas Insulation was great, dependable, on time, great follow up and great pricing. All great attributes you just don't find in Miami anymore. A good old fashioned honorable company a rare find in todays environment or anytime for that matter !!
★ ★ ★ ★ ★
As a General Contractor, I recommend Frank and his team as reliable and knowledgeable professionals. Licensed and Insured company, ready for new projects and service calls.
Our Work
Residential spray foam insulation & Commercial spray foam insulation
Wall blow in Insulation
Dense-packed through small access holes - no demo. Stops drafts, drops noise, holds temperature.
Home blow in Insulation
Walls, attic, floors, crawlspace - one crew, one project. Even temps, lighter power bill.
Attic blown in Insulation
Most of your air escapes here. A deep, even layer keeps heat where you want it - fastest-paying upgrade in the house.
1 / 3
![]()
Affordable blow in insulation across South Florida
Miami-Dade County
- Miami
- Doral
- Hialeah
- Miami Beach
- Coral Gables
- Kendall
- Homestead
- Aventura
- Pinecrest
- Cutler Bay
- Key Biscayne
- Miami Gardens
Broward County
- Fort Lauderdale
- Hollywood
- Pembroke Pines
- Miramar
- Coral Springs
- Davie
- Plantation
- Weston
- Sunrise
- Coconut Creek
- Deerfield Beach
- Parkland
Palm Beach County
- West Palm Beach
- Boca Raton
- Boynton Beach
- Delray Beach
- Jupiter
- Wellington
- Palm Springs
- Juno Beach
Stop Paying to Cool a Hot Attic
Atlas fills South Florida attics with the best blow in insulation fast & for less.
CALL (305) 858-3155Get Your Blown in Attic Insulation
You can’t beat 99¢ a sq ft.